Installation Instructions
1. Please test the rear view camera firstly, if it works well then install (package without rear view lens can be ignored).
2. Turn off the car engine.
3. The TF card insert the recorder slot.
Note:Please use the high-speed TF card (Class 10 above), capacity of not less than 4GB, TF card maximum support 32GB.
4.The recorder via a bracket fixed to the front windshield of the car.
5.Insert the car charger into the car cigarette lighter.
Note:When wiring, extend the charging line along the edge of the car door frame and carpet under the car laying.
6. Install the rear camera at the rear of the vehicle, and pay attention to the up and down direction. Wiring can be buried along the edge of the car roof laying.
Note:There are two ways to install the rear camera:
A–Adsorbed on the glass above and behind the car, hands-on self-installation (Reversing visual function can not be achieved, only real-time recording rear video).
B–To find a professional installers installed in the license plate above the camera at the same time need to connect the power reversing lights (Reversing visual function can be achieved).
7. Adjust the lens position to ensure the best viewing angle.
8. Start the engine and check that the machine is operating properly.
Reviews
There are no reviews yet.